Issue time:2023-03-03 15:46:56 source:安珂工业地垫 views:2891

Presumably, everyone knows that the floor of every factory will be paved with floor mats, because this can not only protect the floor, but also ensure the safety of employees, so every factory owner will choose to pave the floor mats, so what material is good for the floor mats at the door of the factory workshop? What are the protection suggestions? Now let's introduce to you by the small editor of Anke Industrial Floor Mat!

Floor mat at the factory workshop door

What material is good for the floor mat at the factory workshop door?

Polypropylene antiskid mat: light texture, good elasticity, high strength; Rich raw materials, good wear resistance and low price.

PVC anti-slip pad: good drainage, durable, beautiful, long service life. It not only has the anti-slip function, but also can effectively help to scrape the sediment from the sole, and it is very convenient to clean.

Plastic plastic anti-slip pad: It has excellent elasticity. The suction cup at the bottom can also be close to the ground and will not slide easily.

Suggestions for floor mat protection at the workshop door:

1. Prevent hard and sharp objects from directly rubbing the ground. Suitable ground protection materials can be selected, such as industrial floor mats and special industrial floor mats.

2. Corrosive chemicals and solvents splashed onto the ground shall be removed immediately. Special floor mats with chemical resistance and corrosion resistance shall be selected.

3. The grease spilled on the ground must be removed immediately, otherwise the ground will become slippery and easy to cause injury.

4. Hard heavy objects must be handled with care.

5. It is better to lay a rubber pad or soft plastic pad on the ground of the machine operating platform, the heavy raw materials, semi-finished products or finished products storage area.

6. The epoxy floor can only withstand the temperature of 80 ℃ at most. Therefore, for areas that often need electric welding or oxygen cutting, steel plates or other high-temperature insulation pads should be laid on the ground.

7. The casters of all kinds of carts or trailers must be high wear-resistant polyurethane casters with wide stress surface and certain elasticity.

8. When all kinds of carts or trailers are walking, they should be as slow as possible and avoid sharp braking or turning.

9. The ground needs regular maintenance and cleaning, which can not only keep the ground beautiful and clean, but also remove the hard particles that may scratch the paint film on the ground.

The above is the content of the floor mat at the door of the workshop. That's the end of it. I believe you have a certain understanding of the floor mat at the door of the workshop. I hope this article can help you! In addition, if you have any need for floor mats at the door of the workshop, you are welcome to consult us for the floor mats of Anke Industrial.

Tag： Floor mat at workshop doormats